Yellow Bellied Sump Suckers -- the answer to fast, thorough cleaning of machine coolant sumps. There is no faster, more powerful sump cleaner.
Yellow Bellied Sump Suckers

Yellow Bellied Sump Sucker will clean virtually any machine tool sump quickly and thoroughly. During the process of cleaning the machine, the sump cleaner also:

 
  1. Removes the coolant, sludge and chips from the sump
  2. Filters the sludge and chips from the coolant
  3. Returns the filtered coolant to the sump, or
  4. Transports the coolant to waste treatment for disposal or to a Master Chemical XYBEX® Recycling System



The Yellow Bellied Sump Sucker is fast! In a typical example, a cylindrical grinder sump with 120 U.S. gallons (454 liters) of coolant and 700 pounds (318 kilograms) of sludge was completely cleaned, the coolant filtered, and returned to the sump in ten minutes.

Features:

  • Capacities from 65 U.S. gallons (246 liters) to 1,000 U.S. gallons (3780 liters)
  • Single or twin compartment configuration
  • Push around, tow around, or truck mounted units available
  • 3.5 ft3 (.095m3) or 5.3 ft3 (.14m3) holding capacity sludge basket
  • Air, 110V single phase, 3 phase electric, or LP gas Power Sources
  • Complete with hoses and cleaning tools

Portable XYBEX®

APPLICATION
Portable XYBEX® systems are available in single- and double-compartment configurations. In the single-compartment system, the Yellow Bellied Sump Sucker pumps dirty coolant, chips and fines from the machine tool sump and through a filter, removing the solids. With the solids removed, the fluid is returned to the sump and the machine tool resumes production. Then, filtered fluid can be centrifuged to remove tramp oils in a side-stream operation while the machine tool is operating.
With the new, double-compartment portable XYBEX® system, machine sumps are emptied and vacuumed into one side of the system. Clean, replacement fluid, available from the clean-product storage compartment of the system, is used to refill the machine immediately and return it to production.
As soon as the machine tool is back on-line, the centrifuge can be started, transferring the retained fluid from the dirty-product side to the clean side. As the fluid passes through the centrifuge, solids, tramp oils and other extraneous oils are removed from the metalworking fluid, leaving only clean, oil-free, recycled coolant on the clean side of the machine. The portable XYBEX® system then can be wheeled to the next machine tool for tank-side fluid recycling.


Features

  • Standard Yellow Belly sump sucker operation.
  • Small easily removed from the side chip basket.
  • Electric high level sensor to stop Sump Sucker when full.
  • OTC-2 high-speed centrifuge with an electric feed pump to pull fluid from the machine tool to be processed or from the unit itself.
  • Floating skimming device and hoses for operating off a machine tool sump.
  • Easy push style wheels and caster for ease of use and stability.
  • 5 gallon tramp oil collection tank with high level sensor to shut centrifuge off when full.
  • Tool area.



Options

  • A dual compartment 100/100 size unit is available.
  • Three phase electric operation.
  • Tow package.
  • Larger tanks.
  • Larger centrifuge.



Specifications

  • 100 gallon single compartment style, 32" wide x 75" long x 66" high
  • 120 volt single phase operation


"Push-Around" Units:
  • Single Compartment - up to 275 U.S. gallons (1000 liters)
  • Twin Compartment - up to 100/100 U.S. gallons (380/380 liters)
  • Feature center-mounted, high impact, ball bearing wheels for good maneuverability and low rolling resistance



"Tow-Around" Units:
  • Single Compartment - up to 1000 U.S. gallons (3780 liters)
  • Twin Compartment - up to 500/500 U.S. gallons (1890/1890) liters
  • Features heavy duty, four caster design (two swivel and two fixed) with low center of gravity for stability. Tow hitch is included



"Truck-Mounted" Units
  • A YBSS can be assembled on an LP or electric industrial truck for added mobility within a plant atmosphere
  • Single Compartment - up to 400 U.S. gallons (1500 liters)
  • Twin Compartment - up to 200/200 U.S. gallons (750/750 liters)



Drum Top Sump Cleaner

The Drum Top Sump Cleaner is a vacuum unit that converts an existing open-top drum into a powerful machine tool sump cleaner. The drum top is an economical alternative to a dedicated sump cleaner.

Features:
  • Heavy duty drum cover to fit on standard 55 U.S. gallon (205 liter) open top drums
  • Air venturi vacuum generator
  • Positive sealing mechanical float for drum overfill protection
  • 2" (50mm) dia. x 10' (3m) L suction hose
  • 2" (50mm) dia. x 36" (1m) L round cleaning tool



MCC LIQUI-VAC

MCC LIQUI-VAC provides the solution to your sump cleaning problems. It is small enough to fit in your hand, yet it sucks up tramp oils, used oil, and waste coolants quickly and efficiently.

Benefits:  
  • Operates on shop air
  • Attaches to small bung on a 55 gal. (205 l.) drum
  • Has one moving part (safety shut-off valve)
  • Requires no maintenance
  • Has whisper quiet exhaust

Features:

  • Venturi unit
  • 2" dia. x 8' L (50mm. X 2.8 m.l.) suction hose
  • Quick disconnect fittings
  • Air control valve
  • Safety shut-off valve
  • Rigid plastic extension rod
  • Plastic vacuum head tool
  • Plastic crevice tool




info@Erie Industrial