Fluid Mixers

MCC has developed a line of mechanical coolant concentrate mixers to meet the needs of all metalworking shops. These mixers eliminate the traditional fluid mixing methods which often result in poor fluid concentration with subsequent problems of corrosive machine maintenance, fluid rancidity and the final expense of fluid disposal.

UNIMIX™

The UNIMIX™ proportioning pumps were developed to meet the needs of all metalworking shops for accurate, automatic coolant metering and mixing.

Application:
The UNIMIX™ is a water-driven, positive displacement coolant proportioner, which dispenses coolant on demand at the desired concentration.

Benefits:

Reduces concentrate waste
Easy to install
Reliable and consistent
Non-electrical
Adjustable

Specifications:
Water Flow Rate:
5.0 US gpm (19 lpm) noted average flow rate

Mixture Range:

8 oz. E.M. 1% to 4%
16 oz. S.S. 1% to 8%
32 oz. X.L. 2% to 15%

Master Mix

The Master Mix is a compact, easy-to-use, simple-to-operate venturi mixer for the mixing of coolant concentrates with water. A needle valve allows for infinite adjustments across the mixture range.

Features:

2-6% mixing ratio
All metal construction
2" NPT sliding bung adapter for various height drums
Inlet shut-off valve
Lockable adjusting dial with reference scale
Available in 3 U.S. gpm (11.3 lm), 10 U.S. gpm (37.8 lm), and 25 U.S. gpm (94.5 lm)

Operation:
Water, jetting through the unit, creates a vacuum and siphons the concentrate from the drum. The adjusting dial allows the operator to find the exact mixture needed.

SKRAMBLER 2™
Dual-Ratio, Dual-Product Dispenser for TRIM^® CLEAN Products

A rugged, industrial dual-ratio mixer made for dispensing TRIM^® CLEAN products.

The Whammer™
Foaming Application for TRIM® CLEAN Products

The Whammer™ is a simple, durable, low-cost foaming dispenser for TRIM^® CLEAN maintenance cleaners.