Oil/Water Seperators

Refractometers

Quickly determine concentration of metalworking coolants/lubricants, heat-treating fluids, hydraulic fluids and plating baths.

Benefits:

Hand-Held Refractometer provides an efficient, simple method for checking the ratio or concentration of water-soluble industrial fluids.

Features:

Portable - no batteries required
Rugged, impact resistant body and sample cover
Large, easy-to-read scale
Units available with automatic temperature compensation

pH Tester

pH test strips provide a simple uncomplicated way of determining the degree of acidity/alkalinity of aqueous solutions. pH test strips can be used for measuring the acidity/alkalinity of metalworking fluids, cleaners and water samples.

Features:

Immerse strip and read results in seconds
Fast, easy, cost-effective measurements
No costly instrumentation
Accurate to 0.3 pH units

Hard Water Test Kit

A simple to use drop titration kit that provides accurate, easy to read, measurements of water hardness expressed in grains pre gallon as calcium carbonate (CaCO3). Knowing the quality of the water used for diluting metalworking fluids and cleaners is important in picking the correct fluid for the job, and maintaining fluid integrity.

Features:

Kit contains all that is necessary to perform
100 tests
Fast, easy, cost-effective measurements
No costly instrumentation
No difficult mathematical calculations

CL-1, CGF-1
Titration Kits for TRIM® Products

Master Chemical titration kits CL-1 and CGF-1 are used to check the concentration of TRIM^® cleaners, coolants and corrosion inhibitors. Each kit contains a measuring vial, a flask or bottle for mixing, color change indicator solution, and a supply of sulfuric acid. Kit CL-1 is intended for checking aqueous cleaners and corrosion inhibtors. Kit CGF-1 is used to check concentration of coolants.

Kit CL-1 Carrying case and instructions 15 ml dropper bottle of Methyl Orange indicator (indicator B) 15 ml dropper bottle of phenolpthalein indicator (indicator A) 15 ml dropper bottle of Sulfuric Acid (titrant) 120 ml reserve bottle of Sulfuric Acid 6 ml measuring vial 35 ml mixing jar
Kit CGF-1 15 ml dropper bottle of Bromocreasol Green Methyl Red 15 ml dropper bottle of Sulfuric Acid (titrant) 120 ml reserve bottle of Sulfuric Acid 35 ml mixing jar 6 ml measuring vial