REAMERS
Carbide Tipped
Expansion
Chucking Reamers
Morse Taper Shank - Right Hand Cut
List No. 5734
USE
These reamers are recommended for use in reaming abrasive materials. When the diameter wears down to the low limit, it may be expanded oversize, reground
to size and recleared. The expansion pins should NEVER BE LOOSENED in an attempt to use the reamers FOR A SIZE SMALLER than that to which the tools were originally circled ground.
SPECS
STANDARD TOLERANCE +.0003/-0. Adjustable screw allows expansion of reamer for regrinding without replacing carbide.
STANDARD PACKAGE
All sizes - 1 each
Call 814-452-3231 or Fax 814-456-7176 for a complete
catalog.
Back to Reamers
|
