TP3000 now joins TP1000 and TP2000 to
complete the launch of Seco-Carboloy's new generation of
turning inserts. TP3000 is the toughest of the new grade
developments.
TP3000 is classified as an ISO P30 and M25 grade and
satisfies all applications where the primary demand is for
toughness and exceptional reliability in machining steels and
stainless steels.
The properties designed into TP3000
along with suitable chipbreaker geometries provide excellent
reliability at high cutting data. Superior core toughness and
high wear resistance give peak performance even under unstable
conditions and severe interrupted cuts.
Wide variations
in machinability from one batch of materials to another are
easily accommodated by using TP3000 giving the minimum of
disruption to the manufacturing process.
Due to its
superior edge strength TP3000 is produced with a sharper
cutting edge than normally expected from this category of
insert grade. A sharper edge reduces the likelihood of
built up edge when machining materials such as soft ductile
steels and stainless steels especially where cutting speed is
limited.
Performance
The "Triple-Zero" - grades from Seco-Carboloy
represent a new generation in grade design. They are developed
for steel turning with high productivity in focus. They are
suitable for well optimized machining applications in the mass
production and large batch production areas as well as
difficult-to-machine components in small batches. The new
substrate and coating design provides a superior toughness and
wear resistance.
TP3000
.
Interrupted cuts
. High feeds
. Steels, Stainless steels
and cast irons
. Reliability and versatility
Field tests
As with all new Seco-Carboloy products, TP3000 has
undergone exhaustive testing in real machining situations
around the world. TP3000 has shown consistent and dominant
performance in a wide range of applications and workpiece
materials.
Reliability
A common problem for the
metal cutting industry is workpiece materials with uneven
machinability between different batches. This variation can
often destroy all plans to complete production targets due to
the often large and unpredictable variations in tool life.
This is where TP3000 really sets the pace in new grade
developments by reaching previously unachievable levels of
reliability in all kinds of materials.
Tough materials
TP3000 is classified as
an ISO P30 and M25 grade. The main target area for TP3000 is
applications where the primary demands are toughness and
reliability in machining both steels and stainless steels.
When machining tough material e.g. stainless steels, the
specially designed properties of TP3000 in combination with
suitable chipbreaker geometry will provide excellent
reliability and tool life beyond the capabilities of previous
and present products.
Want a free productivity calculator click here.
Want more information on Carboloy promotions please
contact Erie Industrial
